Product Description
In modern industrial construction, industrial plants are important spaces for various production activities and are usually large in scale. The roof area is vast and the demand for roofing materials is considerable. The double-layer tile pressing machine has its advantages in such scenarios. Its unique double-layer design can produce two tiles of different specifications at the same time.
Main Technical Parameters
| Material | Type | PPGI/GI |
| Thickness | 0.3-0.6mm |
| Width | 1250mm |
| Roller Stations | 18Stations |
| Roller & Shaft Material | 45# Steel Quenching and Plating |
| Diameter of Shaft | Φ70mm |
| Cutter Material | CR12 |
| Drive Type | Chain Drive |
| Speed | 15m/min |
| Total Power | 5.5+5.5KW |
| Voltage | 380V 50Hz 3Phases |
Working Flow
Decoiling → Material Feeding → Roll Forming → Cutting → Collecting
Component & Technical Parameters
This part is used to support Coil.
And make the coil in a rotary way.
Bearing capacity: 5T
Inner diameter: 470-530mm
In the production process of the tile press, metal sheets are usually supplied in the form of coils. The primary function of the uncoiler is to smoothly and steadily unfold these tightly wound metal sheets.
Hydraulic Pump Station
The hydraulic pump station converts mechanical energy into stable and powerful hydraulic energy through precise oil pump components, providing power support for multiple key components of the tile press. It drives the roller to operate smoothly and applies continuous and controllable pressure to the roller during the forming stage of tiles such as colored steel tiles or glazed tiles.
Touch Screen Control Cabinet
The control cabinet has two modes, automatic and manual modes.
The unit length of the targeted sheet and quantity can be set in the touchscreen.
The system is simple and easy to operate.
Feeding Table & Pre-Cutter
The feed table is usually equipped with conveying devices, such as conveyor rollers, conveyor belts, etc., which can slowly and steadily convey the plates from one end of the feed table to the entrance of the tile press.
Shaft & Roller
Rollers are the core components for shaping metal sheets into glazed tiles. In the initial stage of production, similar to the leveling process of the floor deck forming machine, rollers will perform preliminary processing on the unfolded metal sheets. By applying reasonable pressure and repeatedly rolling the sheets, the unevenness of the sheets during transportation or storage is eliminated, so that they reach a flatness suitable for subsequent fine processing.
Pressing Section & Cutter
The material of blade is CR12.
With high strength, better hardenability and good wear resistance.
This not only improves construction efficiency, but also ensures that the size of the tiles perfectly matches the actual needs of the building, greatly speeding up the construction progress of the entire construction project and ensuring that the project is completed on time.
|
|
New Design Metal Silo Double Deck Roll Forming Machine Images
|
